Jump to content
Mumble forums

Cant connect to any server


xionous
 Share

Recommended Posts

My problem is that i cannot connect to any server, i run my own server and i have also tried to connect to many public servers, even a local server on the computer that is having the problem.


I have tried changing my firewall setting even completely turning the firewall off. I have tried completely removing the client ( including the information in the registry, and the app data folder ). I have and can connect to my server from other computers in my house including my phone, and my friends can connect to it just fine. I have disabled the QoS in the settings of mumble.


The error message i get when i try to connect is " Server connection failed: The remote host closed the connection. " and the server outputs this:

 

[1395729528] <9:(-1)> Connection closed: The remote host closed the connection [1]
[1395729487] <9:(-1)> New connection: 192.168.1.1:53455
[1395729469] <8:(-1)> Connection closed:  [-1]
[1395729469] <8:(-1)> Timeout
[1395729437] <8:(-1)> New connection: 192.168.1.1:53430
[1395729081] <7:(-1)> Connection closed:  [-1]
[1395729081] <7:(-1)> Timeout
[1395729051] <7:(-1)> New connection: 192.168.1.1:53206
[1395728446] <6:(-1)> Connection closed:  [-1]
[1395728446] <6:(-1)> Timeout
[1395728408] <6:(-1)> New connection: 192.168.1.1:52830
[1395728244] <5:(-1)> Connection closed:  [-1]
[1395728244] <5:(-1)> Timeout
[1395728213] <5:(-1)> New connection: 192.168.1.1:52677
[1395728058] <4:(-1)> Connection closed:  [-1]
[1395728058] <4:(-1)> Timeout
[1395728017] <4:(-1)> New connection: 192.168.1.1:52591
[1395727965] <3:(-1)> Connection closed:  [-1]
[1395727965] <3:(-1)> Timeout
[1395727926] <3:(-1)> New connection: 192.168.1.1:52554
[1395727779] <2:(-1)> Connection closed:  [-1]
[1395727779] <2:(-1)> Timeout
[1395727736] <2:(-1)> New connection: 192.168.1.1:52410

 

IS there anything else i can try? I would really like to get this working i had no problem connecting last nite and then when i get home from work nothing is working, and as far as i am aware nothing on my computer has changed. The only thing that happened to my computer during the day was i logged in remotely via teamviewer to do somthing from work shortly and logged out.


Any help or advice anyone could give would be greatly appreciated.

Link to comment
Share on other sites

Try connecting to 127.0.0.1 first. Odds are this won't work, but it's best to try. This is the loopback address, and should help take some potential problem points out of the loop. I know you said other clients are connecting fine, but why did you try so many ports? And, 192.168.1.1 is the router on most default home installaions. I would make sure you have the right IP and port.


If that still doesn't work you can try to telnet to the local Murmur port, using:

telnet localhost [port]

from the command line, where [port] is replaced with the port your server is listening on. If the telnet command ins't installed, google how to do it. It's easy, and a Windows component.


Let me know, and we'll get it working.

Link to comment
Share on other sites

When i started the local server, it automatically came up in the server list. I didn't even have to add it, and yes i have tried manually adding the local server and using a local loopback address to connect i still have the same problem, it tried to connect hangs then disconnects with the error. this is the first thing i tried when i started having the issue, but i should have elaborated more on it.


as for the ip and ports i know these are correct i am not a novice when it comes to networking i am infact a very advanced user who has worked on business level network administration albeit has been a few years since then i'm sure i haven't forgotten much, and i have only changed the port the server uses to connect once to rule it out as an issue then changed it back. the thing that bothers me is that with everything i have tried something should have worked to fix the problem but nothing has and i have run out of logical solutions to try.

Link to comment
Share on other sites

I have the same problem. 2 systems on the same router can connect. This one will not. Started about 3 days ago. Windows troubleshooting says Mumble is incompatible.

It makes a windows "error" sound when opening then after about a minute I get "Server connection failed: The remote host closed the connection." Totally baffled.

Link to comment
Share on other sites

Ah sorry i forgot to add that to the post. Telnet connects just fine, and i didn't use 192.168.1.1, those logs are from the server and that is what it output when i try to connect i didn't set it like that that is just what it is doing.

Link to comment
Share on other sites

I have a thought; did you configure your account as a registered one, then accidentally or purposely change your cert? Or, maybe change your username with the same cert?


I would re-add the server manually, using a different username altogether, and see if that works. If not, run through the new cert wizard, and try again using a new connection with a new username.

Link to comment
Share on other sites

OK so i didn't change my cert at first, but now i tried what you suggested and i still cant connect.


As for the log from the client, the error message i got from it before is " Server connection failed: The remote host closed the connection. " but now it says this when i try to connect to both servers:

 

[10:22:16 PM] Connecting to server Matthew-PC.local..
[10:24:30 PM] Disconnected from server.
[10:24:59 PM] Connecting to server Matthew-PC.local..
[10:27:17 PM] Disconnected from server.
[10:29:00 PM] Connecting to server 192.168.1.5.
[10:31:14 PM] Disconnected from server.
[10:31:32 PM] Connecting to server 192.168.1.5.
[10:34:05 PM] Disconnected from server.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...