Mumble ice help

[Blueberryjr]

Hey I host free teamspeak servers for pretty much any gaming community who would ask for one and I wish to expand over to mumble. I am encountering a problem when trying to get ice to work. I cannot connect to it remotely or from localhost. I ran a netstat on both my windows server and linux server and both of them say the port is being actively listened on. Still I am unable to make a connection. Could someone please assist with this? The config file will be listed below. :|

 

# Murmur configuration file.
#
# General notes:
# * Settings in this file are default settings and many of them can be overridden
#   with virtual server specific configuration via the Ice or DBus interface.
# * Due to the way this configuration file is read some rules have to be
#   followed when specifying variable values (as in variable = value):
#     * Make sure to quote the value when using commas in strings or passwords.
#        NOT variable = super,secret BUT variable = "super,secret"
#     * Make sure to escape special characters like '\' or '"' correctly
#        NOT variable = """ BUT variable = "\""
#        NOT regex = \w* BUT regex = \\w*

# Path to database. Ifd blank, will search for
# murmur.sqlite in default locations or create it if not found.
database=

# If you wish to use something other than SQLite, you'll need to set the name
# of the database above, and also uncomment the below.
# Sticking with SQLite is strongly recommended, as it's the most well tested
# and by far the fastest solution.
#
#dbDriver=QMYSQL
#dbUsername=
#dbPassword=
#dbHost=
#dbPort=
#dbPrefix=murmur_
#dbOpts=

# Murmur defaults to not using D-Bus. If you wish to use dbus, which is one of the
# RPC methods available in Murmur, please specify so here.
#
#dbus=session

# Alternate D-Bus service name. Only use if you are running distinct
# murmurd processes connected to the same D-Bus daemon.
#dbusservice=net.sourceforge.mumble.murmur

# If you want to use ZeroC Ice to communicate with Murmur, you need
# to specify the endpoint to use. Since there is no authentication
# with ICE, you should only use it if you trust all the users who have
# shell access to your machine.
# Please see the ICE documentation on how to specify endpoints.
ice="tcp -h 127.0.0.1 -p 6502"

# Ice primarily uses local sockets. This means anyone who has a
# user account on your machine can connect to the Ice services.
# You can set a plaintext "secret" on the Ice connection, and
# any script attempting to access must then have this secret
# (as context with name "secret").
# Access is split in read (look only) and write (modify) 
# operations. Write access always includes read access,
# unless read is explicitly denied (see note below).
#
# Note that if this is uncommented and with empty content,
# access will be denied.

#icesecretread=test
icesecretwrite=test

# How many login attempts do we tolerate from one IP
# inside a given timeframe before we ban the connection?
# Note that this is global (shared between all virtual servers), and that
# it counts both successfull and unsuccessfull connection attempts.
# Set either Attempts or Timeframe to 0 to disable.
autobanAttempts = 10
autobanTimeframe = 120
autobanTime = 300

# Specifies the file Murmur should log to. By default, Murmur
# logs to the file 'murmur.log'. If you leave this field blank
# on Unix-like systems, Murmur will force itself into foreground
# mode which logs to the console.
logfile=murmur.log

# If set, Murmur will write its process ID to this file
# when running in daemon mode (when the -fg flag is not
# specified on the command line). Only available on
# Unix-like systems.
#pidfile=

# The below will be used as defaults for new configured servers.
# If you're just running one server (the default), it's easier to
# configure it here than through D-Bus or Ice.
#
# Welcome message sent to clients when they connect.
welcometext="<br />Welcome to this server running <b>Murmur</b>.<br />Enjoy your stay!<br />"

# Port to bind TCP and UDP sockets to.
port=64738

# Specific IP or hostname to bind to.
# If this is left blank (default), Murmur will bind to all available addresses.
#host=

# Password to join server.
serverpassword=

# Maximum bandwidth (in bits per second) clients are allowed
# to send speech at.
bandwidth=72000

# Maximum number of concurrent clients allowed.
users=100

# Amount of users with Opus support needed to force Opus usage, in percent.
# 0 = Always enable Opus, 100 = enable Opus if it's supported by all clients.
#opusthreshold=100

# Maximum depth of channel nesting. Note that some databases like MySQL using
# InnoDB will fail when operating on deeply nested channels.
#channelnestinglimit=10

# Regular expression used to validate channel names.
# (Note that you have to escape backslashes with \ )
#channelname=[ \\-=\\w\\#\\[\\]\\{\\}\\(\\)\\@\\|]+

# Regular expression used to validate user names.
# (Note that you have to escape backslashes with \ )
#username=[-=\\w\\[\\]\\{\\}\\(\\)\\@\\|\\.]+

# Maximum length of text messages in characters. 0 for no limit.
#textmessagelength=5000

# Maximum length of text messages in characters, with image data. 0 for no limit.
#imagemessagelength=131072

# Allow clients to use HTML in messages, user comments and channel descriptions?
#allowhtml=true

# Murmur retains the per-server log entries in an internal database which
# allows it to be accessed over D-Bus/ICE.
# How many days should such entries be kept?
# Set to 0 to keep forever, or -1 to disable logging to the DB.
#logdays=31

# To enable public server registration, the serverpassword must be blank, and
# this must all be filled out.
# The password here is used to create a registry for the server name; subsequent
# updates will need the same password. Don't lose your password.
# The URL is your own website, and only set the registerHostname for static IP
# addresses.
# Only uncomment the 'registerName' parameter if you wish to give your "Root" channel a custom name.
#
#registerName=Mumble Server
#registerPassword=secret
#registerUrl=http://mumble.sourceforge.net/
#registerHostname=

# If this option is enabled, the server will announce its presence via the 
# bonjour service discovery protocol. To change the name announced by bonjour
# adjust the registerName variable.
# See http://developer.apple.com/networking/bonjour/index.html for more information
# about bonjour.
#bonjour=True

# If you have a proper SSL certificate, you can provide the filenames here.
# Otherwise, Murmur will create it's own certificate automatically.
#sslCert=
#sslKey=

# If Murmur is started as root, which user should it switch to?
# This option is ignored if Murmur isn't started with root privileges.
#uname=

# If this options is enabled, only clients which have a certificate are allowed
# to connect.
#certrequired=False

# If enabled, clients are sent information about the servers version and operating
# system.
#sendversion=True

# You can configure any of the configuration options for Ice here. We recommend
# leave the defaults as they are.
# Please note that this section has to be last in the configuration file.
#
[ice]
Ice.Warn.UnknownProperties=1
Ice.MessageSizeMax=65536
:oops: 

[kissaki]

You specified

`ice="tcp -h 127.0.0.1 -p 6502".

As you specified 127.0.0.1 ice will only be listened on on the localhost address and you will only be able to connect from localhost.

You specified the port 6502 so I guess that is the port you checked for. With that line, it should indeed be listened on as you were able to verify with netstat.

You furthermore configured

> #icesecretread=test

> icesecretwrite=test

so when connecting to the port 6502 the ice way and you specify the password test, you should be able to connect and have read+write access.

You didn’t really provide any information on how you tried to connect and what the error was, so that’s all I can say.