This is a read-only archive of the Mumble forums.

This website archives and makes accessible historical state. It receives no updates or corrections. It is provided only to keep the information accessible as-is, under their old address.

For up-to-date information please refer to the Mumble website and its linked documentation and other resources. For support please refer to one of our other community/support channels.

Jump to content

Murmur won't register as public


Recommended Posts

Hey Guys,

I'm setting up a mumble-server on my RPi, but I'm facing a little issue.

I want to make it visible in the public list, but can't make it ...

The options I set :




With mydomain being the address I use to connect to my server and myport the matching port ...

Connecting works well, but the server does not appear in the public list.

(It's hosted in France.)

Here are the logs :


sudo cat /var/log/mumble-server/mumble-server.log
<W>2016-11-28 00:18:00.641 Initializing settings from /etc/mumble-server.ini (basepath /etc)
<W>2016-11-28 00:18:00.652 OpenSSL: OpenSSL 1.0.1t  3 May 2016
<C>2016-11-28 00:18:00.654 Successfully switched to uid 112
<W>2016-11-28 00:18:01.445 ServerDB: Opened SQLite database /var/lib/mumble-server/mumble-server.sqlite
<W>2016-11-28 00:18:01.497 Resource limits were 0 0
<W>2016-11-28 00:18:01.498 Successfully dropped capabilities
<W>2016-11-28 00:18:02.003 Murmur 1.2.8 (1.2.8-2) running on X11: Raspbian GNU/Linux 8.0 (jessie): Booting servers
<W>2016-11-28 00:18:02.148 1 => Server listening on [::]:64738
<W>2016-11-28 00:18:02.303 1 => Announcing server via bonjour
<W>2016-11-28 00:18:02.342 Object::connect: No such slot MurmurDBus::userTextMessage(const User *, const TextMessage &)
<W>2016-11-28 00:18:10.304 1 => <1:(-1)> New connection:
<W>2016-11-28 00:18:10.771 1 => <1:(-1)> Client version 1.3.0 (Win: 1.3.0~1733~g153c0aa~snapshot)
<W>2016-11-28 00:18:11.127 1 => Starting voice thread
<W>2016-11-28 00:18:11.199 1 => CELT codec switch ffffffff80000010 0 (prefer ffffffff80000010) (Opus 1)
<W>2016-11-28 00:18:11.343 1 => <1:Atanakar(1)> Authenticated
<W>2016-11-28 00:20:27.616 1 => Registration: No DNS records found: Source-based callback failed. Server not reachable.


I guess the line

Registration: No DNS records found: Source-based callback failed. Server not reachable.

Has something to do with it, but the dns are correct since I connect to the server using them, and sometimes by messing with the parameters I get the line not to show but still no listing in public servers ... (Things like removing the port or removing the quotes.)

Any suggestion ?

Link to comment
Share on other sites

  • 1 month later...
  • 2 months later...


I have same problem as friend above, on my RPi, unhashed things like he had and server is not visible, could you please precize what to unhash and what to leave unchanged? How much time is needed to be refreshed and seen on mumble public list?






Thank you

Link to comment
Share on other sites

  • Moderators

You need registerHostname uncommented, and it needs to be a hostname that publicly resolves to your server's IP.

If you get "Registration: Successful" then you'll show up in the server list sooner or later, how long depends on how aggressively the user's local mirror is caching the server list. If you get any other message about registration, that'll tell you what's going wrong.

"Registration failed" is a local error, "Registration:" is an error from the other end. So that means if you get "Registration failed: hostname lookup error" or something like that, it means your server couldn't resolve the public list server's hostname, but if you get "Registration: hostname lookup error" that means the server couldn't resolve your server's hostname (ie whatever's in registerHostname).

I think you also need registerUrl, but I'm not 100% sure on that.

Full disclosure: I used to run a commercial Mumble host, and my opinions do not reflect the opinions of the Mumble project.

Avatar is stolen from here

Link to comment
Share on other sites


  • Create New...