Hot Key PTT to specific chat rooms

Mumble about Mumble

Hot Key PTT to specific chat rooms

Postby djsashaz » Fri Aug 14, 2015 4:11 am

I was wondering, is there a plugin anywhere that would allow me to assign hotkeys to specific chat rooms, and PTT to a specific room instead of having to login/logout? So ideally I want to be logged into multiple rooms and be able to listen to all of them, but talk specifically into each room with separate hotkeys....

I am guessing in advance that this would need to be modified in the code to support it?

S
djsashaz
 
Posts: 5
Joined: Fri Aug 14, 2015 4:05 am

Re: Hot Key PTT to specific chat rooms

Postby fwaggle » Fri Aug 14, 2015 5:13 am

You can use shout to PTT to other channels.

You can't hear other channels without without linking channels, which is what most of the "squad" type ACL setups do, such as the one on the ACL page of the Wiki, so if you're admin of a server you might start there.
Full disclosure: I used to run a commercial Mumble host, and my opinions do not reflect the opinions of the Mumble project.
Avatar is stolen from here
User avatar
fwaggle
Team member
Team member
 
Posts: 217
Joined: Tue Oct 06, 2009 10:40 pm
Location: Australia

Re: Hot Key PTT to specific chat rooms

Postby djsashaz » Sat Aug 22, 2015 5:01 am

Is that in the Mac client? because I can only see one PTT button option.... What I am looking to achieve is to have hot buttons to shout to each room, for example SHIFT+1 would be for room 1 and SHIFT+2 would be for room 2. etc.....
djsashaz
 
Posts: 5
Joined: Fri Aug 14, 2015 4:05 am

Re: Hot Key PTT to specific chat rooms

Postby djsashaz » Sat Aug 22, 2015 5:02 am

Correction..... I see it... shout to channel.... FOund it....

Thanks,
djsashaz
 
Posts: 5
Joined: Fri Aug 14, 2015 4:05 am

Re: Hot Key PTT to specific chat rooms

Postby djsashaz » Sat Aug 22, 2015 5:04 am

Next question.... is there a way to trigger some short cut to send a command when there is chat in a specific room? Say for example trigger my raspberry pi to flash a LED for one room, and flash another colour for another room....
djsashaz
 
Posts: 5
Joined: Fri Aug 14, 2015 4:05 am

Re: Hot Key PTT to specific chat rooms

Postby fwaggle » Thu Aug 27, 2015 4:42 am

djsashaz wrote:Next question.... is there a way to trigger some short cut to send a command when there is chat in a specific room? Say for example trigger my raspberry pi to flash a LED for one room, and flash another colour for another room....


Not out of the box. You might have a look at the G15 stuff and see if you can adapt it to do what you want.

Note that if I recall correctly, you can't see if there's chatter in a channel unless you're receiving it (ie they're linked to your current channel). I believe the "lips turning red" and so on are all tied to the code for receiving audio data - we don't sync that information separately.
Full disclosure: I used to run a commercial Mumble host, and my opinions do not reflect the opinions of the Mumble project.
Avatar is stolen from here
User avatar
fwaggle
Team member
Team member
 
Posts: 217
Joined: Tue Oct 06, 2009 10:40 pm
Location: Australia


Return to General

Who is online

Users browsing this forum: No registered users and 2 guests