Murmur simple IP problem need help

It crashed, it is bugged, ...

Murmur simple IP problem need help

Postby good3yesniper » Sun Mar 14, 2010 3:04 am

Im trying to run my own Murmur server. But im having problems whit the IP, I allrdy did the portfoward and made a static IP but when i use my IP which i got using this website http://whatismyipaddress.com/ to know my IP.
when i try to run murmur i get Server: TCP Listen on 72.50.1.135:64738 failed: The address is not available. though when i dont put the ip in the ini i can get the server running but other ppl cant join.

What am I doing wrong pls help!!!
good3yesniper
 
Posts: 4
Joined: Sun Mar 14, 2010 2:55 am

Re: Murmur simple IP problem need help

Postby kissaki » Sun Mar 14, 2010 8:55 am

good3yesniper wrote:though when i dont put the ip in the ini i can get the server running but other ppl cant join.


Please elaborate.

If it does not work with that IP your PC probably can’t bind to that IP address. Just leave it out, then it will listen on all available IPs, which should work perfectly.
You only need to bind if you have more than one IP and want to limit the server to one.
MumPI: Your Mumble Web Interface in PHP
User avatar
kissaki
Team member
Team member
 
Posts: 1294
Joined: Sat Jan 09, 2010 12:15 pm

Re: Murmur simple IP problem need help

Postby good3yesniper » Sun Mar 14, 2010 10:57 pm

K thx for reply, ill try that then.
good3yesniper
 
Posts: 4
Joined: Sun Mar 14, 2010 2:55 am

Re: Murmur simple IP problem need help

Postby good3yesniper » Fri Mar 19, 2010 5:05 am

K I got a question if dont put in the ip, how am i gonna wich i ip murmur is using then?
good3yesniper
 
Posts: 4
Joined: Sun Mar 14, 2010 2:55 am

Re: Murmur simple IP problem need help

Postby kissaki » Fri Mar 19, 2010 8:15 am

If you don't bind to a specific IP address it will listen on all IP addresses.
So any Address your computer can be accessed with will work.
In LAN you can connect with your LAN-IP, via internet you can connect with your internet IP.
MumPI: Your Mumble Web Interface in PHP
User avatar
kissaki
Team member
Team member
 
Posts: 1294
Joined: Sat Jan 09, 2010 12:15 pm

Re: Murmur simple IP problem need help

Postby good3yesniper » Fri Mar 19, 2010 2:09 pm

K that out of the way, I made my server public. i did everything right but when try to find my own server in public I dont find it, later on in my server log i get this Registration: Source-based callback failed. Server not reachable.?
could i pls get a tutorial on how to set up the server and make it public. Ive all ready read a lot on the guides but dont help to much. I can get the server running, i know the basic but i just wanna where im going wrong. I just need like a simple tut or an example of a server u may be running would be helpfull.
good3yesniper
 
Posts: 4
Joined: Sun Mar 14, 2010 2:55 am

Re: Murmur simple IP problem need help

Postby kissaki » Fri Mar 19, 2010 4:44 pm

Can anyone connect to your server?
Are you sure your firewall (and router) are set up correctly?
It seems your server was started and tried to register itself, the register-server checked back if that server exists and couldn't find it. Seems like a port/firewall issue.
MumPI: Your Mumble Web Interface in PHP
User avatar
kissaki
Team member
Team member
 
Posts: 1294
Joined: Sat Jan 09, 2010 12:15 pm


Return to Technical

Who is online

Users browsing this forum: No registered users and 2 guests